自导深弹导引弹道设计与仿真

针对自导深弹自导系统设计过程中,面临的简化目标探测系统和弹体姿态控制系统的要求,设计采用自动调整提前角导引算法作为自导策略;操极限舵,采用直接由导引算法得出舵角值的弹体姿态控制方法.给出了纵平面内深弹运动学模型、目标运动学模型、深弹与目标相对运动模型的数学描述,并在Matlab/Simulink 环境下完成了以上三个模型的实现和子模块封装, 编制了描述深弹整个自导过程的Simulink模块化程序;给出了自导深弹自动调整提前角导引方法的实现原理,并基于Simulink/StateFlow工具箱建立了该导引算法的图形化程序进行了仿真研究,验证了导引方法的有效性.     

自适应现状制导律

针对反弹道导弹的导弹武器的主动飞行段,提出了高精度自适应现状制导律。通过实时修正飞行程序,以消除导弹飞行过程中遇到的各种干扰的影响,保证命中精度,并对发动机推力偏差、风干扰影响下的导弹运动进行了数学仿真,仿真结果证实了自适应现状制导律是合理、可行的。     

基于遭遇角决策的并行双模切换舵减摇控制

结合舵减摇控制中通用线性模型与模糊线性模型的优缺点,采用了一种根据遭遇角的不同自动切换控制器设计模型的并行双模切换舵减摇控制方案。为在线自动辨识遭遇角,提出基于横摇功率谱密度柱状图的神经网络辨识方法。仿真结果表明,该方法辨识精度较高,且比传统重心法节省了在线计算量与存储数据库所需的存储空间,简化了辨识流程。     

大攻角飞行导弹自动驾驶仪反馈线性化设计

针对大攻角空空导弹飞行过程中复杂的非线性空气动力学特性,提出了采用反馈线性化进行控制器设计的方法.在完成导弹俯仰通道的非线性建模的基础上,采用反馈线性化理论对导弹模型进行精确线性化,然后,对线性化后的系统给出了变结构控制系统设计.最后,通过仿真验证了所设计的控制器具有良好的动态性能及较好的工程参考价值.     

A worst‐case formulation for constrained ranking and selection with input uncertainty

In this research, we consider robust simulation optimization with stochastic constraints. In particular, we focus on the ranking and selection problem in which the computing time is sufficient to evaluate all the designs (solutions) under consideration. Given a fixed simulation budget, we aim at maximizing the probability of correct selection (PCS) for the best feasible design, where the objective and constraint measures are assessed by their worst‐case performances. To simplify the complexity of PCS, we develop an approximated probability measure and derive the asymptotic optimality condition (optimality condition as the simulation budget goes to infinity) of the resulting problem. A sequential selection procedure is then designed within the optimal computing budget allocation framework. The high efficiency of the proposed procedure is tested via a number of numerical examples. In addition, we provide some useful insights into the efficiency of a budget allocation procedure.     

一种瞄星替代方法方案设计

角度零位一致是舰炮武器系统精确打击目标的前提和基础,鉴于传统瞄星方法的局限性,在舰艇系泊条件下,提出了一种新的瞄星替代方法,该方法选择合适的海上及岸上目标作为瞄准目标,运用相应的算法,可以完成舰炮武器系统角度零位的标定工作.该方法可以作为未来舰炮武器系统零位标定的一种备用方法和手段进行使用.     

射击效率评定中火炮幅员及毁伤幅员计算

在已有计算火炮幅员及毁伤幅员成果的基础上,根据炮兵作战行动的特点,分阶段讨论了火炮幅员及毁伤幅员的计算方法,是对现有火炮幅员及毁伤幅员参考数据的完善,为提高射击效率评定的精度提供了较为丰富的数据基础.同时根据所建模型,分析了不同航路角情况下火炮幅员及毁伤幅员的变化趋势与极值情况,为优化炮兵作战行动提供了一定理论支持.     

应用全站仪综合测量火炮偏离角及俯仰半径

提出一种应用全站仪进行火炮偏离角和俯仰半径的综合测量方法。应用最小二乘原理拟合出火炮俯仰半径,然后解算出火炮偏离角,并用Monte Carlo方法分析了测量结果的精度。结果表明:全站仪高低角和火炮仰角的测量精度均对火炮偏离角和俯仰半径的测量结果无明显影响;全站仪测距精度对火炮俯仰半径测量结果的影响较大;全站仪水平角测量精度对火炮偏离角测量结果的影响明显。该方法在现场操作时需要重点关注全站仪水平观测角和测距的检测精度。     

非奇异快速终端滑模及动态面控制的轨迹跟踪制导律

针对飞行器跟踪预设轨迹的问题,提出非奇异快速终端滑模和角度约束的轨迹跟踪制导律。通过引入虚拟目标点,提出参考轨迹曲率半径的期望视线角约束条件,建立带有视线角约束并考虑自动驾驶仪动态特性的轨迹跟踪数学模型。为了保证在有限时间内跟踪预设轨迹并避免出现奇异问题,采用快速非奇异终端滑模和动态面控制方法进行制导律设计。推导出视线角误差和轨迹跟踪误差之间的数学关系,并利用Lyapunov稳定性准则证明轨迹跟踪误差最终有界任意小。与弹道成型轨迹跟踪制导律进行仿真对比,仿真结果表明所提出的制导律具有良好的跟踪性能及鲁棒性。     

Path planning for moving target tracking by fixed-wing UAV

For the automatic tracking of unknown moving targets on the ground, most of the commonly used methods involve circling above the target. With such a tracking mode, there is a moving laser spot on the target, which will bring trouble for cooperative manned helicopters. In this paper, we propose a new way of tracking, where an unmanned aerial vehicle (UAV) circles on one side of the tracked target. A circular path algorithm is developed for monitoring the relative position between the UAV and the target considering the real-time range and the bearing angle. This can determine the center of the new circular path if the predicted range between the UAV and the target does not meet the monitoring requirements. A transition path algorithm is presented for planning the transition path between circular paths that constrain the turning radius of the UAV. The transition path algorithm can generate waypoints that meet the flight ability. In this paper, we analyze the entire method and detail the scope of applications. We formulate an observation angle as an evaluation index. A series of simulations and evaluation index comparisons verify the effectiveness of the proposed algorithms.